Guide · phases and capacity
Home battery on one phase or three phases: what fits your connection?
With a home battery you often read single-phase or three-phase. That is about the connection, not about how much energy fits in it. A single-phase home battery charges and discharges over one line, a three-phase home battery over three lines. On this page you first check which connection you have. Then we put the phases next to the kWh.
Which connection do you have?
With a single-phase connection, 1 cable with 230 volts enters your home. With a three-phase connection, that is 3 cables with 230 volts each. You can read which one you have on the electricity meter in your meter cupboard.
A 3x25A connection is the standard connection and has a maximum power of 17 kW. Source: ANWB.
Worked example: what fits over one phase?
A single-phase home battery sits on one phase and is usually protected by a 16 amp breaker. Multiply voltage by current and you see how much power that circuit can carry.
This is an upper limit for that one circuit, not advice. Have a qualified installer decide which circuit and breaker fit your installation.
Phases are about power, not about kWh
The kWh tells you how much energy the battery can store. How much of it goes through your installation at once depends on the phase and the power. Take two batteries of 5 and 10 kWh with the same inverter: the bigger one asks no more of your connection. It can only charge and discharge for longer. That is why you work out the kWh first and look at the phases after that.
How to choose between one phase and three phases
There is no phase that is right for every home. Go through these points and take them to the conversation with the installation partner.
Start with your connection
A three-phase home battery needs a three-phase main connection, so it can charge and discharge over three lines.
Three phases at home? One phase also works
You can connect a single-phase home battery to a single-phase or a three-phase connection. It then does not spread the current over all three lines, so its power stays limited.
A lot of current at once
A battery on three phases can charge or deliver more current at once. On the other hand, it costs more and has to be installed by an installer.
Spreading over the phases
Three separate batteries on one phase each do not automatically form one system on three phases. Without joint control, each battery only manages its own phase.
Connection and meter cupboard
- Always check what fits on your existing connection. Ask your installer whether the connection needs upgrading. Source: Enexis Netbeheer.
- With a three-phase connection you can spread your energy use over the 3 phases. Source: Enexis Netbeheer.
- Grid operator Enexis gives no advice on the connection capacity you need and refers you to a qualified installer. Source: Enexis Netbeheer.
Read more
- Home battery power in kWThe difference between power (kW) and capacity (kWh).
- 10 kWh home batteryWorked example and limits of the rule of thumb for 10 kWh.
- 25 kWh home batteryA large size worked out on one or three phases.
- Calculate capacityUse your annual consumption to work out an initial range in kWh.
Frequently asked questions
Do I need a three-phase home battery?
Not automatically. A single-phase battery can also work with a three-phase connection. It depends on the phase distribution, the inverter, the power and how you want to use the battery.
Does the number of phases depend on the kWh?
No. The kWh tells you how much energy the battery can store. Phase and power tell you how much can flow through your installation at once. A bigger battery with the same inverter asks no more of your connection.
How do I see whether I have one phase or three?
Look at the electricity meter in your meter cupboard. If it says 220/230 volt, you have a single-phase connection. If it says 3x220/230V or 380/400V, you have three phases. If you are not sure, ask your grid operator.
Does the calculator take phases into account?
No. The calculator gives a range in kWh based on your annual consumption and, if you enter it, your solar array capacity in kWp. You have the number of phases assessed in the follow-up advice.

First the kWh, then the phases
Work out an initial range in kWh with your annual consumption. You then discuss which connection and number of phases fit in the follow-up advice.
Calculate your capacityShort check · Free advice · No obligation